Exact replica to the factory units.  Well.. almost.  The factory units were made of steel.  These are made of anodized aluminum.

Don't drill your front bumpers.  These brackets mount to the hood support behind the grille.  And if you look behind your grille, you will see the two holes where the bracket is designed to mount onto.  On AC cars, the condenser uses one of the holes as a mounting point.  You can still use that same location to mount the brackets.

Early cars, 71 and older do not have those holes.  The factory accessory was made available starting 1972.  You can still mount those brackets.  It will require that you drill 2 holes on the hood support, just like the factory did.

On 74s thru 76, one of the grille ribs will have to be cut for the bracket to fit through the grille.  That is not an issue on the early noses as they they did not have a vertical rib like the late cars.

The left and right units are different.

Another view.

On the car.

With the lights.

Another one with the big Bosch lights.

$30 a pair + $5 shipping anywhere in the US.

No hardware is included but they are available at most hardware stores.  You will need four 8 mm bolts, 4 flat washers, 4 lock washers and 4 nuts.  If the existing holes have nothing mounted on them, the length of the bolts should be at least 40 mm long.

Email me at bimmerfan02@hotmail.com for more details or to order a set.