The four-color temporary tattoos are printed reversed so that when you affix them to your girlfriend's nubile body, they 'right' themselves. Four to five days (depending on if you scrub or just wash) is the normal life expectancy. Mix and match the two designs - 6 for $10 postpaid to any US address. Each tattoo is the size of a US half-dollar (about 1.5" in diameter). 

The pin-back earrings (both shield - $150 and as sculpted horse style - $175) as seen above in sterling .925 silver. They are also sold individually as jacket lapel pins, $90 and $80, each, respectfully. 

Same exact item in 14k gold is $430/pair. Your choice of fully-sculpted horse or the 'shield' style horse.

The unique Veglia watch is $175 and the medium pendant in Sterling Silver next to the watch is $280.

The 14k ladies ring (top, right) is $360, size 5.5 only.

One temporary tattoo is free if you agree to send me a photo with it displayed on your cumada/wife (or on both!).... Are you wondering what a 'cumada' is....?

 

Here's a rare NOS Ansa six-into-two exhaust. $750. Perfect, rare, fits early dozen-cylinders 166 or 250 or 340.

                             NEW ADDITIONS TO MY SITE:

Sterling Silver and 14k gold Alfa Romeo and Ferrari jewelry items. I made them for various Ferrari 

dealerships and you can now buy them direct - without the dealer's markup.

Available are rings, pendants (in full relief), earrings, lapel/tie pins, bracelets, and one-half 

scale VIN plates in Sterling Silver used as key chains. You can have your car's serial number 

(telaio), model number and other info engraved into the appropriate spots. 

The mirrors on the right are for older Ferraris. Which one? Lusso? The fuse panels are for a Ferrari 250 and for 330.

    The Ferrari regalia items are at the bottom of this page....take  a look.             
          
             Feel free to make me an offer on nonpriced items 
---------------------------------------------------------------------------------------------------
Assorted ring and pinions for 250s, 330s.                             
Blaupunkt shelf speaker 12V black case 5x7x2" used. 
Norma amber bulb 3 terminals, single element 6V - 40W  #E2   CO01J
Lucas 2 element #445 12V - 60/40W bulb  large flange base. 
Altissimo 414.12.18 IGM1487IL1 amber teardrop assy.  4" long.
STORZ metal spiral jack. 3" sq. foot 'MB 254'  red ball end. 
L-shaped lug wrench 7/8" w/gray plastic sleeve. Fiat Dino + Ferrari.
Lug wrench w/swivel 14x21mm,  14x18mm,  14x19mm,  13/16" with handle.
Asst. water/oil pipes. Aluminum and steel varieties. NOS.
Hella tail light lens red w/amber center 6" diam. integral chrome bezel.
Cable (81") w/gray sheath (91") 6mm one end, 8mm the other. 
Girling disc brake kit SP2506         See contents at end of this list.
Girling master cyl kit SP2172\2      See contents at end of this list.
Girling master cyl kit SP2484\1     See contents at end of this list. 
Girling master cylinder rebuild kit  SP2376/2  
Water bypass hose w/ fittings from #1273GT
14mm ratchet jack drivers, yellow. Fiat Dino and Ferrari uses.
Cigarette lighter inserts w/element NOS. Long and short styles.
9 fuse fusebox w/cover NOS (R main beam, L M B, R dipped, L dipped...)
9 fuse fusebox cover (wipers/turn/stop, instr/rev/light, pump, def...)
12 fusebox base. NOS. 2 decals inside.
14 fusebox base w/fuse holder NOS.  
1 NOS round Raydot headlight w/ bracket. 6" w/ gold colored insert.
1 NOS Vitaloni rearview mirror 30025 Ie3 trapezoidal 7.5" blk plastic.
1 NOS Vitaloni rearview mirror 249 TP-RT I trapezoidal 8" blk plastic.
4 NOS chromed headlight bezels 4.5" 4 tang mount.
1 used blk plastic rearview mirror ball/socket mount 12" trapezoidal.
1 used chromed rearview mirror rectangular 8.25x2" L-mount w/2 bolts.
1 rearview mirror trapezoidal blk wrinkle metal backed 8.5x2.5" "Tex"
Rear axle links (rubber encased metal sleeves) 1 9/16"  X   1 7/8"
2 NOS Hella 5.75" round highbeam/lowbeam halogen headlight conversion.
1 5.5" Marchal chromed headlight rim w/retainer. 2+1 ears for attachment.
1 7" 3 ear chromed headlight rim. 1" deep. 
2 7" 3 ear chromed headlight rims. 3/4" deep. 
3 black padded steering wheel trim. NOS. Triangular shaped.
Pair of 'Tex' brand sideview mirrors (rectangular & round ones available. 
Set of 4 Amadori aluminum calipers for late drum-braked 12 cylinder cars, complete
        with fittings, bleed screws, pads, spring keepers. One caliper has missing pistons. Digital photos available.
250GTE/GT, Boano, 330GTC, 330 2+2 Large assortment of interior trim.
'Konig TR Turbo' muffler w/ dual outlet, misc. piping. Massive!
Early 12 cylinder ANSA NOS muffler. 2 sets of 3 inlets, 2 outlets. 24" long.
400i/308 Benditalia brake booster. Marked "used but OK". $125 
A variety of brake boosters/fluid reservoirs. Rebuilding necessary.
308/Mondial trouble light w/pouch, cig adapter NOS (2nd one assembly with cord only)
2 rectangular asbestos/aluminum starter heat shields. ~ 5" X 7"
2+1/8" Girling caliper rubber seals. NOS.
250/330 FIAAM Fuel filter assembly. Aluminum housing 3.5" diameter.
250 Blaupunkt speaker at passenger's knees. NOS 12V 5x7x3" tan plastic box cover. 
250 Clutch slave cylinders. NOS.
Boano window crank w/phenolic knob and escutcheon
Boano escutcheon (another for above).
Boano/250 GTE Front hub bearings (2) NOS. 1 large, one small.
Boano /PF Coupe and Cab 2nd Series Differential bearing and holder.
Boano/250 GTE LF kingpin bushes (2).
Boano odd steel pipes - several ones with unusual branches. Needs
 to be rewelded.
508C brake banjo, brass, (2).
508C master cylinder fitting, brass.
Boano L side door jamb molding, aluminum.
Boano dash, bare.
508C  axle bearing. Rear outer: 32 x 62 x __ 
250/508C Rear outer axle bearing. NOS 32mm x 62mm x __mm.
250 Boano Driver's side door frame molding. Aluminum.
250 Boano NOS front wheel bearing and race.
250 Boano driveshaft cover. Aluminum. 
250 Boano LF upper king pin pivot.
250 Boano rear windshield interior trim. Stainless steel.
250 Boano hood hinge and latch assy.
250 Boano headlight dimmer switch - floor mounted.
250 Boano passenger's door frame molding.
250 Boano carpeted trunk panel: 32.5" X 27" w/two 3.5" holes.
250 Boano seatback knurled nuts w/adjustor bolts. Also fits Lusso.
250 Boano interior door pull and window crank. Amber phenolic /aluminum.
250 Water bypass tubes, aluminum, p#128C 24632 4-bolt mount, 2 flanges
250 Clutch pivot arm.
250 Fuel pump check valve
250 Emergency brake adjuster (brass)
250 GTE Alternator bracket.
250 GTE front int trim aluminum L side curved 2-hole mount from #2199
250 GTE parking light housings/boot R side 5w/20w round Carello 4"
250 GTE rear view mirror. Needs new cover glass. $395.
250 GTE fuse panel boards and covers: 9" X 9.5" 
250? fuse panel covers? 7" X 3.5"  12" X 3.5"
250 GTE air inlet grill at base of windshield.
250 GTE front seat tracks. 
250 GTE seatback hinge/adjuster. various.
250 GTE window lift assy.
250 GTE fascia bracket. 2 holes, crescent shaped steel.
250 GTE engine compartment light assy.
250 GTE hood latch assembly. From #2199 2 arms, threaded rod.
250 GTE tach(?) sheath 33", knurled alum nuts & flanges both ends.
250 GTE brake reservoir master cylinder brackets (2) from #2199.
250 GTE left vent window mechanism from #2199.
250 GTE emergency brake arm/fork and the 2 C-shaped aluminum covers.
250 GTE inner fender panels. 
250 GTE Right vent cable with phenolic knob and nut. 
250 GTE driver's vent window frame.
250 GTE left rear window trim from #2199. Stainless steel. 
250 GTE rear right vent window trim from #3225.
250 GTE (and PF Cab) round aluminum interior foot vents. 
250 GTE right rear vent window trim from #3225.
250 GTE trunk trim from #4915.
250 (early) fan housing.
250 GTE emergency brake bracket. NOS. 
250 GTE pedal box.
250 GTE LF nose with bumper tubes.    
250 GTE rear windshield chrome frame and stainless trim at bottom. 
250 GTE gas filler neck and trunk trim from #3225.
250 GTE driver's door interior roof trim from #4915.
250 GTE round left foot vents and exterior vents from #4915.
250 GTE windshield frame and A-pillar to windshield aluminum molding.
250 GTE left rear window trim from #4915. Stainless.
250 GTE left door threshold plate from #2199.
250 A variety of dashes - padded and unpadded - with glovebox doors.
250 All 4 sp overdrive eccentric bush. Brass. $115
250 NOS wheel bearings and holders.
250 heater core: 10.75" X 6.5" X 2" and box.  
250 (Cab/Coupe) Right door stop lever.
250 PF Coupe R side int kick panel leather on aluminum w/chrome L-trim.
250 PF Coupe driver's side upper door molding. 
250 PF Coupe inner fender panels.
250 PF Coupe windshield chrome frame and aluminum molding.
250 PF Coupe lower windshield and vent molding. 
250 PF Coupe interior windshield frame molding -2 pieces- 
250 PF Coupe Drivers and Pass interior door moldings w/alum trim.
250 PF Coupe driver's side back seat trim.
250 PF Cab seatback knurled nuts with adjustor bolts.
250 PF Cab door light switch assembly.
250 PF Cab L kick panel from #3683 leather over aluminum. 
250 PF Cab Driver's door trim and inner plate at jamb. 
250 PF Cab front and rear inner wheel well panels.
250 PF Cab heater/defroster control lever set.
250 PF Cab rear passenger side molding.
250 PF Cab right door top trim from #3683.
250 PF Cab driver's door frame panel and underdoor trim. Aluminum. 
250 PF Cab left top inner door trim from #3683.
250 PF Cab top right door trim from #3683.
250 PF Cab right inner wheel well cover from #3683.
250 PF Cab front left inner fender panel from #3653.
250 PF Cab right door panel. Aluminum from #3683.
250 PF Cab heater/defroster chromed guide.
250 PF Cab trunk lamp switch from #3683.
250 PF Cab doorstop. 
250 PF Cab terminal strip. 6 connections. Goes under steering wheel.
250 PF Cab overdrive inspection plate. Aluminum. 
250 PF Cab trunk trim. Aluminum.
250 PF Cab door lock trim (chromed)
250 TdF dash lights. Green and blue.
250 Thermostats. 
250 oil bypass tube. 
250 rain drip trim.
250 rear ashtray mount. Leather covered. 
250 front vent grill from #4685.
250 ashtrays. Chromed. part #2426493000 $290 each. Pull out, not flip top.
250 (All)  Aluminum fan housings at engine nose. 3-bolt mount. 
250 taillight lens. Red/red. 
250 PF and GTE rear vent window hinge part #2424276202 $240.
250 GTE wiper motor.
250 heat shields. One pair, triangular shaped. $395/pr.
250 GTE fuse panel w/ mount brackets from #2199.
250 GTE fuse panel w/2 relays, fuse block, mount brackets.
250 Sun visors and hardware from #2199.
250 NOS Steel radiator fan blades. 
250 driveshaft U-joint. NOS.
250 transmission nut. NOS.
250 Caliper seals (2) Girling, 2 1/8" diameter.
250 Electric fan clutch assy.
250 Speedometer drive gear.
250 Cab Series 2 door lock trim, chromed.
250 GTO competition on/off rocker 3 pole. NOS.
250/330 window motor. Marelli. 2 wires. p# TGE556
250/330 king pin bushes (new and used).
275 GTB/4 oil breather tube - aluminum, 3 bolt flange, ~ 18" long.
275 Rear suspension bush (1)
275 Accelerator pedal assembly.
275 Rear swaybar link. It needs rewelding.
275 Lower rear A-arm. NOS. 
275 bushings for above, NOS 2 long and 2 short.
275 master cylinder pieces, incomplete.
275 Aluminum heater Valves NOS (3) and spare tops. 3 outlets on each.
275/330 bezel for 3 sets of 2 switches on dash part# 712007
275/330 GTC battery hold down bracket: 7" X 10 1/2"
330 air conditioning components. 
330/275 interior door pull.
275 accelerator pedal.
275 rear swaybar upright bar, needs to be reworked.
275 Left front door plate at hinges, aluminum, triangular. 1 NOS, 2 used.
275 windshield washer outlet. NOS.
275 Headlight covers. NORS. Need trimming. From FAF.
275 Carello front turn/parking light assemblies 2" clear
 conical IGM0164LAX
275? Carello lens conical 2.75" clear IGM0159LAX clear.
275 passenger's side door skin. Excellent condition. 
250/330 overdrive tail unit.
250/330 4 speed OD 2nd and 3rd gear bushings.
250/330 dash mount 3-position twist switch assy. 6,7 pole.
250/330 NOS chromed steering column bezel.
250/330 grab handle insert and chromed end pieces.
250/330 clutch adjustment pin and link.
250/330/SWB/late PF Coupe/400SA front and rear Dunlop calipers.
330 (GTC or 2+2?) alternator mount
330 radiator expansion tank w/bracket.
330 (?) OD springs, 5, NOS, ~4 1/2" long.
330 windshield trim, stainless steel, small 90 degree curved piece.
330 brass speedo drive gear.
330 (Boxer?) throttle shaft  stanchions, heim-jointed.
330 (late) and 365 power steering pulley.
330 water pipes (2) aluminum, 2-bolt flange, 4" long.
330 Electric fan clutch assy, single pulley. 
330 Driveshaft end bush.
330 Fuel pump drive gear with new bearings.
330 Electric fan motor mount.
330 Cylinder head water fittings - aluminum.
330 Dash mount NOS Lucas 3-position push/pull switch. 5-pole. 
330 Throttle shaft mounts. Heim-jointed. NOS (2)
330 Overdrive springs. NOS.
330 Overdrive brass speedometer sender.
330 GTC triple brake reservoir bracket.
330 NOS clutch slave cylinders.  
330 Sun visors and hardware.
330 Tail light covers (inside the trunk) black fiberglass/plastic 12x4"
330 2+2/GTC Alternator mount bracket.
330 2+2 threaded accelerator linkage 12.5" long.
330 2+2 air inlet grill at base of windshield.
330 2+2 Front inner fender panels.
330 2+2 Driver's door, both doors' armrests, trim.
330 2+2 NOS water thermostats. 
330 2+2 Front & rear quarter window, door moldings. Stainless steel.
330 2+2 Driver's and passenger's sun visors w/brackets. Fair condition.
330 2+2 front vent window mechanism.
330 2+2 driver's door electric window switch bezel. Duplex.
330 2+2 aluminum radiator grill. Fair condition.
330 2+2 vent window frame and trim.
330 heat shields (2). Small rectangular w/ 2 mount tabs on each.
330 gas filler neck.
330 2+2 (?) fuel tank. 11"x 27"x 22"  2+2 tab mounts, deep center scallop. FIM brand. 
330 2+2 gas filler neck (shorter than one for a 250).
330 2+2 vent window assemblies. 
330 2+2 rear vent window hinges, chromed 3 bolt mount 
330 2+2 lower vent levers -2-.
330 2+2 wheel hub flange. 
330 2+2 overdrive tail stock.
330 2+2 speedo drive gear. NOS. 5-speed.
330 Vent window regulators. NOS part# 246-30-420-00
330 window cable roller assy.
330 GTC R side stub axle splined 35mm.
330 GTC Pass side vent window frame. NOS. part# 246 30 337 02
365 2+2 vent window frame and trim.
365 2+2 left window sill plates.
365 2+2 R aluminum upper door trim NOS 
365 2+2 right window sill plate.
365 2+2 pass vent window frame. NOS. part #251 30 33?5 08 (I have 2)
365 2+2 right upper rear door trim. NOS. part# 251-44-228-08
365 2+2 (and probably 330) transmission stabilizer bar, fork, adjuster
Lusso transmission mounts (2).
Lusso/330 aluminum radiator trim.
Lusso heater box door and rubber outlets.
Lusso rear view mirror. Chromed. Astro III TPRT201.
Lusso seatback knurled adjuster nuts and bolts.
Lusso Water pump to radiator outlet. NOS 2-stud flange, curved aluminum.
365 GTC/4 A-pillar trim. 2 pieces, stainless.
365 GTC/4 tach. Veglia. Excellent condition. $425.
365 GTC/4 headlight hinge. 
365 GTC/4 oil hose w/ fittings.
365 GTC/4 right vent window frame. NOS. part #253.30.338.08 
365 GTC/4 right B-pillar stainless steel trim piece.
365 BB bumpers. Aluminum.
330/365 NOS bezels for electric window switches. Chromed. 
330/365 battery hold down bracket. 
365 GTB/4 transmission synchro sleeves NOS and good used.
365 GTB/4 NOS synchro spiders (triangular shaped, inner splined).
365 GTB/4 misc. transmission components.
365 GTB/4 driver's side ANSA exhaust NOS Rear section w/muffler 60.5"
365 GTB/4 Horn relay and electrical fitting.
365 GTB/4 water pump housing. Needs work at impeller.
365 GTB/4 battery hold down bracket: 7 1/4" X 12 3/8"

                       NOS DINO/DAYTONA PARTS:
Reverse light assembly.
246 GT front upper A arms.
REMOTE TRUNK PULL CABLE (INSIDE GAS FILL)     			920045506
Firewall levers w/cables/holder $420 (also 1 used)        920070405
SET OF 3 LEVERS W/CABLES, NO HOLDER, NOS $250  920070405
(1) Carello (USA) sidemarker lens  (DAYTONA OR DINO)     	920176806
(4) METAL BRACKETS FOR ABOVE      920178802,              	920178901
(2) ROTORS WITH HUB ASSY (also 2 used rotors w/hubs)
(4) HOOD HINGE PINS (2 with, 2 without grease fittings)        920023206
(8) RUBBER END-LINK BUSHES FRONT SWAY BAR     900100984
(4) A-ARM BUSHES  WITH 2 METAL SLEEVES "HARRIS 66532 FG" FOR ABOVE?
(2) CHASSIS SERVICE MANUAL 61/72   
(1) HEADLIGHT BUCKET                                           920176707
(1) RADIATOR GRILL (EGGCRATE) SQUARE/LATE  VERSION             920243408
(1) EXHAUST SYSTEM FAF#FE1720 STAMPED:"236E 20529 827036"
FRONT hood frame "structure"                                   920141404
ALUMINUM HOOD FOR ABOVE                                        920183901
DRIVER'S & PASSENGER'S DOOR SKIN (ALUM)    	920018404     920018503
"SIDE SHIELD"                                920067500         920067609
"SIDE PANEL"                                 920252102         920252003
(2) PLASTIC RADIATOR BLADES NAPLEN BRAND   NORS
(4) WIDE WHEEL FLARES (FIBERGLASS) STAMPED "MAS-1824L,R"
AIR DEFROSTER HOSE MURRAY #277946 NORS
ENGINE COMPARTMENT LOCK AND BRACE WITH CROSSMEMBER
Cam box end plate w/ gasket. Magnesium.
Speedo drive gear. 

Above are some selected Ferrari parts...for 250 and 330 series cars.

                     USED 246 and 365 GTB/4 ITEMS:  
Steering coupler - splined - 
Used Dino ignition board (for mounting the Dinoplexes) 10.25" X 11.5"
REAR (RED) AND FRONT (BLACK) FUSE BOX COVER AND SCREW $275 each.
MARELLI WIPER MOTOR  MODELS TGE 571-A, TGE 130-D, TGE 130-B
(4) ALUMINUM GAS TANKS WITH TRANSFER TUBES AND FILLER NECKS
(4) TAIL LIGHT BEZELS EXCELLENT CHROME PLUS AMBER & RED LENS
(2) COMPLETE SETS OF BUMPERS, Euro, fair to excellent chroming.
Driver's door.
RADIATOR WITH THERMOSTAT FAIR CONDITION
DRIVER'S DOOR COMPLETE EXCEPT ROLLDOWN WINDOW
MANY INTERIOR PIECES, LEATHER COVERED ITEMS, exterior stainless trim.
(3) SMITHS VENTILATION FAN MOTORS
(2) COMPLETE DASHES WITH GAUGES, GLOVEBOX DOOR.
(2) SETS STOCK HEADERS AND HEAT SHIELDS
JACK/BAG/LUG WRENCH     $1200 for the trio. Repainted jack.
(2) FOREDIT  WIPER BAGS WITH COVERS  
SPARE TIRE HOLD DOWN BOLT W/ WASHER
Timing chain tensioner.
Speedo drive cable.
246 GT trunk/rear wheel fiberglass floor panel.
246 Gas tank straps with hardware.
246 right side stainless door trim.
246 gas filler neck.
246 battery cover plate.
246 airbox nuts. 
246 Rear quarter window lower trim. Stainless steel.

Maserati brake pads: Girling: DCN 105 FF 1071 64325428QD  Another set of Girling
           pads: GP244

Front and rear set NOS Fiat Dino(?)  bumpers. Perfect chrome. 

Girling MC kit 2484\1 contains: 1 wave, 2 lock washers, 1 tapered 11/16"piston assy,
   2 screws, 1 tapered seal 7/16x7/8x3/16" seal 3/16x3/8x1/8" O-ring 5/8x13/16x1/8" sq.
cut O-ring 7/8x1             
  1/8x1/8".

Girling MC kit SP2172\2 contains: dust boot 1 1/16", tapered chrome 
      bezel 7/8", odd shaped snap ring, stepped seal  3/16x3/8", tapered seal  5/16x3/4". 

Girling SP2506 kit contains: 2 figure-8 shaped gaskets, 2 seals 1 7/8"  ID, 2 
      cap off plugs, 2 sq. cut O-rings 2 3/8"ID,  4 O-rings 1 11/16"ID

There are more items that I've yet to catalog. Send me your 'want' list. I also have a nice       
   selection of Ferrari and Alfa Romeo  boutique/regalia items for sale.

Steven Piantieri    SPiantieri@cfl.rr.com 
2040 N. Rio Grande Ave.
Orlando, FL 32804 USA

						Additional items:
Matched Set -  Ring: 9:40 532.59407 (NOS) pinion: 9:40  532.59406 (NOS).These are for
 a 212/375/340. Specs are:
9.25" OA ring gear diameter, 16x147mm bolt circle, 30mm pinion shaft diameter, 
8+11/16" pinion.
    
Matched Set -  Ring: 3.23  2800270-323 MS29  3  8 71 B    
Pinion: 3.23 3507396                   3 15 71 B

Matched Set -  Ring: 8:34 538.59433     "No. 76  108.7"	   
Pinion: 8:34 571.580068 "No.76 108.7" for a 330(?)

Ring gears:
           9:31 563.580267   
           7:32 538.59429     for a 250...
           7:32 518.59124
           8:34 571.580218 No. 736 108.6 
           8:34 571.580218 No. 645 108.55 
         11:35 564.580032    "late LM/250 P" C G ML "No. 3 105.1"
         11:35 no part #     "#3 - 105.1  CGM4" "late LM/250 P"
         10:33 563.580014    "250LM"(?) No. 500 107.8
           9:32 563.580213   107.85 No. 510
           9:38 532.D.59395
           ?:??  0419-100 130             for a 308
         
Pinions:   
           part# 3507396               "3.23 3 15 71 F" (275 GTB/S, worn)
           part# 563.520653.1033    for a 275 GTB/S
          9:32 No. 510 107.85 563 5201918 (worn, 275B/S)
           9:41 R8322
           8:34 571.580068             for a 330 part #38.120 worn  
           9:34 518.59122               for a Boano and 250 Europa.
           7:32 508.C.59213 
	8:34 No. 588  108.4  557 770 580068
	8:34 No. 191 108.65 551 771
          10:33 No. 435 107.5 563 520653

Full color temporary tattoo of the rectangular Ferrari logo.  6/$10 postpaid. The 
     perfect gift for the Tifosi that has (almost) everything! 1.5" height. I also      
     have the round Alfa Romeo logo in full color as a temporary tattoo  - same price.

Solid brass key chain, quality made. 4" with two brass keepers and the Ferrari script 
in red. Nicely boxed in red and black. $10.

Black pullover. Embroidered Scuderia shield in gold,  2" tall. Textured 100% cotton. 
L, XL made in USA by Lloyd Williams. Raglan sleeves. These retailed for $40. 

Tan pullover. Embroidered Scuderia shield in black, 2" tall. Textured 100% cotton. M, 
L, XL made in USA by Lloyd Williams. Raglan sleeves. These  retailed for $40. 

Golf/kitchen towel. 25" x 16" with brass grommet. Absorbent 100% cotton made in 
USA by Cannon. Black. It has the prancing horse in 2" embroidery. $32.

Solid brass license tag frame. Clear-coated for durability. It comes with quality 
brass hardware. "Ferrari" in script and two small shields at the  bottom. Made with 
pride in the USA. $38.

Black sweatshirt with tri-color Ferrari script at the center. 100% cotton. Adult size 
Small  (36"). $38.

Please add UPS fees. Cash, money order, and PayPal accepted.

Steven Piantieri            
2040 N. Rio Grande Ave.
Orlando, FL 32804 USA

I have sold Sterling Silver and 14k gold Ferrari items to several Ferrari dealers. Rings, pendants, earrings, tie tacks, bracelets, and 
many other items. Inquire for pricing and details. All are done in high-relief using sterling silver and 14k (and 18k) gold.

I'm always looking to purchase excess quantities or out-of-stock or discontinued inventory, automotive related or not.  I pay a healthy 'referral fee' for  passing on information about a collection of literature, boutique items or a parcel of hard mechanical parts that you know is for sale or trade. Tell me about it and we both stand to benefit from it!