HARLEY SPORTSTER SLIP-ON STRAIGHT PIPES- DRAG
***NEW***

                      
 
 

$120.00 (Includes shipping)

THESE ARE THE ONES YOU HAVE BEEN WAITING FOR.
THESE WORK WITH 1-3/4 INCH STOCK PIPE.
YOU GET 2-24 INCH CHROME PIPES-SLANT CUT AND FLARED
ON BOTH ENDS. (2" DIAMETER)
YOU ALSO GET 2 REDUCERS TO MAKE THEM FIT TO YOUR EXISTING PIPE.
REMOVE YOUR MUFFLERS, INSTALL THE REDUCERS. I USED A BLOCK OF WOOD
TO DRIVE THE REDUCER OVER EXISTING PIPE-TIGHT FIT. I DID NO DRILLING OR USED NO SCREWS.
I LEFT THE FLARE ON THE FRONT PIPE TO MATCH MY CHROME HEAT SHIELD. I CUT THE FLARE OFF THE BACK PIPE. YOU MAY HAVE TO CUT ONE OR BOTH TO YOUR DESIRED LENGHT. I CUT THEM WITH A HACK SAW. I USED THE OLD MUFFLER CLAMPS ON THE NEW PIPES. THE FRONT PIPE, I MADE A SMALL
BRACKET TO ATTACH TO BIKE. THE BACK PIPE, I USED A CARRIAGE BOLT TO ATTACH.
THE NEW PIPES FIT SNUG OVER THE REDUCER. ONCE I CLAMPED THEN DOWN, THEY WERE SECURE.
I SAVED $400.00 TO $500.00 ON DOING THIS MYSELF. NOW MY
BIKE SOUNDS LIKE A HARLEY SPORTSTER SHOULD SOUND.
YOUR NEW PIPES ARE COVERED IN PLASTIC.
(my install time was about 1 hour on a 1993 1200 xlh)
"PIPES ARE NOT MANUFACTURED BY HARLEY DAVIDSON"
WE ONLY SHIP TO LOWER 48 STATES
Pay at bikerdvd.com(VISA)