P112 Photos
This is the P112 with a 1MB RAM module, replacing the two 512K RAMs on the P112. It has two 512K RAMs in the SOP surface-mount package style (second RAM is underneath.) You can see the 3-pin header in place of the battery holder used for an external battery:
This is the production P112-GIDE Printed Circuit Board:
The final 'Top Mount' assembly with P112 on the bottom, and two GIDE adapters stacked above it. Note that the P112 battery holder has been removed and replaced with a three-pin right angle header for an external battery. The primary GIDE adapter (middle PCB) handles two CF-IDE adapters with 128MB CF modules; the secondary GIDE (top PCB) handles a Seagate 850MB IDE drive and a 32x CDROM drive. Supplied software allows you to read/copy files from a CD. A backup program is being written that will copy the entire contents of both primary GIDE drives (Master and Slave) to the Master IDE drive on the secondary GIDE adapter.
